Staphylococcus, swine flu? DISINFECTION, CLEANING - swimming pool, pool, jacuzzi, Staphylococcus Aureus, bird flu, swine flu, H1N1, H5N1. Disinfecting and cleaning agent for surfaces, water disinfection. Chemicals for swimming pools, bactericidal, fungicidal, virucidal,swine.
OXISEPT®

application:
disinfecting and cleaning agent for surfaces and facilities

purpose:
public and private places

effectiveness:
bacteria, viruses-100% effectiveness against Avian Influenza H5N1, fungi

Order OXISEPT®






OXISHOCK®

application:
disijfection and clarification of the water

purpose:
swimming pools, saunas, spas, jacuzzi

effectiveness:
restores water cleanliness and transparency

Order OXISHOCK®
Contamination of the water, e.g. with Staphylococcus Aureus’ bacterium, coli bacillus (Escherichia Coli), blue pus bacterium (Pseudomonas Aeruginosa), Legionella Pneumophila, fungus dermatophytosis or viruses, e.g. HSV (the herpes virus) cause often closing down the swimming pool sometimes even for two weeks, which is resulted in a loss of clients and expensive exchange and heating of new water.

A systematic use of Oxilab disinfecting products gives the possibility to avoid those costs, using only a part of it for prevention, instead of exchanging and heating up new water.

ATTENTION: Carefully rinse swimming pool filter before use and maintain optimal water pH at the level of 7.2-7.6.

Everyday disinfection of beach and the surroundings

Weekly disinfection of water with OXISHOCK®

Through pool's disinfection without exchange of water after reporting the contagion of water with bacteriums, viruses or fungus

Thorough pool's disinfection without exchange of water after reporting the contagion of water with bacteriums, viruses or fungus

Disinfection of bath, spa, jacuzzi

Blood, urine, excrement in water

EVERYDAY DISINFECTION OF BEACH AND THE SURROUNDINGS
  1. Wash carefully the swimming pool’s floor, lower part of the walls, shower cabins, locker room, toilets and all the rooms used by clients with 2% solution of OXISEPT® (160g sachet dissoluted in 8l bucket of water).
  2. Clean or sprinkle thoroughly the overflow channel with OXISEPT®, so that the product can flow through the outflow pipes.
  3. Leave the specimen for 15 minutes and then wash it off and do not let it pour into the swimming pool’s water.
  4. Change the 2% OXISEPT® solution for disinfection of feet in the shower tray every day.

WEEKLY DISINFECTION OF WATER WITH OXISHOCK®
  1. Spread the product over the water surface. Do not inhale the powder.
    1. private pools used rarely – once a week 100g per 10m3 of water,
    2. public pools used rarely – once a week 200g per 10m3 of water,
    3. increase the dosage accordingly to more intensive usage.
  2. The swimming pool is ready to use after 15 minutes.
CAUTION: It is advised to disinfect the pool from 1 to 4 hours before examining the water by agencies controlling water’s condition.

THOROUGH POOL’S DISINFECTION WITHOUT EXCHANGE OF WATER AFTER REPORTING THE CONTAGION OF WATER WITH BACTERIUMS, VIRUSES OR FUNGUS.
  1. Disinfect water in the pool with OXISHOCK® by spreading the powder over the water surface, 200-400g per 10m3, depending on the degree of contagion. Do not inhale the powder.
  2. Wash carefully the swimming pool’s floor, lower part of the walls, shower cabins, locker room, toilets and all the rooms used by clients with 2% solution of OXISEPT® (160g sachet dissoluted in 8l bucket of water).
  3. Clean or sprinkle thoroughly the overflow channel with OXISEPT®, so that the product can flow through the outflow pipes. Leave the specimen for 15 minutes and then wash it off and do not let it pour into the swimming pool’s water.
  4. Rinse the pool’s filter according to the filter’s manual.
  5. Use 2 – 4 packages of OXISEPT® (depending on the filter’s measurements) to the filtering installation, e.g. to the pump and fill up the water treatment installation with the solution. Leave the OXISEPT® solution for 15 minutes. Leaving the OXISEPT® solution for an hour in the installation is advantageous in case of removing limescale, under which germs collect together.
  6. Rinse the pool’s filter and the whole disinfected installation.
IMPORTANT: Each part of the pool’s equipment having contact with water should be washed with the OXISEPT® solution.

THOROUGH POOL’S DISINFECTION WITH EXCHANGE OF WATER AFTER REPORTING THE CONTAGION OF WATER WITH BACTERIUMS, VIRUSES OR FUNGUS
  1. Wash the pool and the balance tank with the 2% solution of OXISEPT® (160g sachet dissoluted in 8l bucket of water) by pouring it to the water installation as well and then rinse it with water.
  2. Further actions as in points 2-7 mentioned above.
IMPORTANT: Each part of the pool’s equipment having contact with water should be washed with the OXISEPT® solution.

DISINFECTION OF BATH, SPA, JACUZZI
  1. Pour 60g of OXISHOCK® per each 1000 l of water after every use of bath, spa, jacuzzi. Do not inhale the powder. Bath is ready to use after 15 minutes.
  2. Whilst exchanging water, clean the bath with 2% OXISEPT® solution (160g sachet dissoluted in 8l bucket of water) and leave the solution in the bath and installation for 15 minutes and then rinse it.
  3. Disinfect the beach, bath’s surrounding, shower, toilets, locker rooms every day with 2% OXISEPT® solution.
  4. Change the 2% OXISEPT® solution for disinfection of feet in the shower tray every day.

BLOOD, URINE, EXCREMENT IN WATER
  1. It is advisable for all users to leave the pool for disinfection’s time (25-30 minutes).
  2. Remove the solid contaminations from the water surface with a bucket of a net.
  3. Disinfection of water in the swimming pool with the OXISHOCK® product: Spread the powder over the water surface, 200-400g per 10m3, depending on the degree of contagion. Do not inhale the powder.
  4. Rinse the pool’s filter according to the filter’s manual.
  5. Use 2 – 4 packages of OXISEPT® (depending on the filter’s measurements) to the filtering installation, e.g. to the pump and fill up the water treatment installation with the solution.
  6. Leave the OXISEPT® solution for 15 minutes.
  7. Rinse the pool’s filter (according to the filter’s manual) and the whole disinfected installation. The pool is ready to use.
Offer
Home \ Hints
Hints